Can't connect to Snap Server 1100

rzutnik · 08-16-2007, 01:54 PM

I have a Snap Server 1100 and assist can’t find it on my network, I connect Snap directly to the computer and still don’t find it.
After I connect power cable Snap automatically power on and after about half minute system LED blink once and Disk Led blinks twice repeatedly. It doesn’t have IP address from DHCP server. I try to connect HDD to Windows and Linux and I don’t find anything on it. It was my mistake, I know it now but I found this forum too late.
I can reset snap and when I do it the Disk LED flashes correspond to the number of times I pressed the Reset button. After this procedure server restarts and I still can’t connect to it. I try to reset everything. I think that I don’t have system on HDD in Snap, and I must to copy it from image but I can’t find it anywhere. I send e-mail to Adaptec but I had nothing answer from them.
Please help me to repair my Snap Server.

blue68f100 · 08-16-2007, 02:37 PM

LED pattern you describe is presented when the OS is not found. HD Failure.

You will need a Snap 2200 image file to boot your 1100. These models are the only ones that will work. The other models use different code, flashram.

rzutnik · 08-21-2007, 01:57 PM

Is someone who can help me to obtain OS image? If yes please contact me for e-mail rzutnik@poczta.onet.pl.

08-16-2007, 01:54 PM	#1
rzutnik Cooling Neophyte Join Date: Aug 2007 Location: Poland Posts: 3	Can't connect to Snap Server 1100 I have a Snap Server 1100 and assist can’t find it on my network, I connect Snap directly to the computer and still don’t find it. After I connect power cable Snap automatically power on and after about half minute system LED blink once and Disk Led blinks twice repeatedly. It doesn’t have IP address from DHCP server. I try to connect HDD to Windows and Linux and I don’t find anything on it. It was my mistake, I know it now but I found this forum too late. I can reset snap and when I do it the Disk LED flashes correspond to the number of times I pressed the Reset button. After this procedure server restarts and I still can’t connect to it. I try to reset everything. I think that I don’t have system on HDD in Snap, and I must to copy it from image but I can’t find it anywhere. I send e-mail to Adaptec but I had nothing answer from them. Please help me to repair my Snap Server.

08-16-2007, 02:37 PM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Can't connect to Snap Server 1100 LED pattern you describe is presented when the OS is not found. HD Failure. You will need a Snap 2200 image file to boot your 1100. These models are the only ones that will work. The other models use different code, flashram. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

08-21-2007, 01:57 PM	#3
rzutnik Cooling Neophyte Join Date: Aug 2007 Location: Poland Posts: 3	Re: Can't connect to Snap Server 1100 Is someone who can help me to obtain OS image? If yes please contact me for e-mail rzutnik@poczta.onet.pl.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)