![]() | ||
|
|
FS/FT Forum Are you looking to make some money? Get rid of some gear? This is the place to sell and buy it all! |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Neophyte
Join Date: Apr 2003
Location: Washington D.C. area
Posts: 13
|
![]()
Model: PD24B2
Comair Rotron Patriot 24V dc. Terminals & ball bearing fans. 235 CFM, 51.2 dBa Size: 6.75" dia x 2.00" deep (171.5mm x 50.8mm) Operating Temperature Range: -10°C to +70°C Storage Temperature Range: -40°C to +85°C Feathered Edge™ for Lower Noise Ball Bearings Weight: 1.84 Lbs. (.84 Kg) I have 2 of these beasts in excellent working order. $25 + s/h for both. Comair Rotron Tarzan: Tarzan® AC AC Tubeaxial Fan FEATURES: Size: 6.91" x 4.40" deep (176mm x 112mm) Air Flow: 330 CFM / 65DBA Voltage: 115 & 230 VAC (50/60 Hz) Operating Temperature Range: -10°C to +70°C Storage Temperature Range: -40°C to +85°C Ball Bearings Terminal connection Weight: 5.0 Lbs. (2.27 Kg) $55 I have parts from a Thermotek T252 Water Chiller I have all but the actual enclosure & the dehumidifier. Both which are not necessary to operate this chiller. It's all working properly but it's been parted out so buyer-beware (some assembly required). I can ship it with everything connected so you know what goes where. It's capable of chilling water to below 5 degrees celsius. I'm lookin' to get about $150 for it but of course...i'm open to offers etc. Also have an Iwaki MD-70RLZ 11.4 GPM $175 Thanks for stoppin' by, feel free to ask any questions...if motivated, I could take some pictures. Oh and I have feedback at heatware & eBay (over 140 positive & no negative...) Last edited by Brad; 05-25-2003 at 01:54 PM. |
![]() |
![]() |
![]() |
#2 |
Cooling Savant
Join Date: Sep 2002
Location: Fort Worth, TX
Posts: 102
|
![]()
shipping and handling to 30066?
__________________
yeah, hi, I umm... oh crap this isn't a personal |
![]() |
![]() |
![]() |
#3 |
Cooling Neophyte
Join Date: Apr 2003
Location: Washington D.C. area
Posts: 13
|
![]()
$12-14 for USPS Priority.
|
![]() |
![]() |
![]() |
#4 |
Cooling Neophyte
Join Date: Oct 2002
Location: san jose, ca
Posts: 91
|
![]()
12v or AC
__________________
AthlonXP 1800+ @ 135x11.5 Epox 8k5a2+ Antec SX830 case 256MB Micron PC2400 WC system soon... Iwaki MD-30RZ (getting fittings right now) Cathar WW block #102 (arrived) Heater core (still pondering) (still need to get tubing) |
![]() |
![]() |
![]() |
#5 |
Cooling Neophyte
Join Date: Apr 2003
Location: Washington D.C. area
Posts: 13
|
![]()
zThey are 24volt AC
|
![]() |
![]() |
![]() |
#6 |
Cooling Neophyte
Join Date: Oct 2002
Location: san jose, ca
Posts: 91
|
![]()
nm sorry
__________________
AthlonXP 1800+ @ 135x11.5 Epox 8k5a2+ Antec SX830 case 256MB Micron PC2400 WC system soon... Iwaki MD-30RZ (getting fittings right now) Cathar WW block #102 (arrived) Heater core (still pondering) (still need to get tubing) |
![]() |
![]() |
![]() |
#7 |
Been /.'d... have you?
Join Date: Jul 2002
Location: Moscow, ID
Posts: 1,986
|
![]()
They can be run at 12V. It will keep them nice and quiet ... they like it alot.
__________________
#!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|