Need some Input.

pippin88 · 08-01-2003, 11:28 PM

I've been designing a box to sit under my Lian Li PC-60. I originally wanted to use brushed Alu, but that was going to be a problem and have since been offered some access to a Laser cutting machine capable of cutting through perspex.

Here is my design so far:

While it isn't that clear, the two black objects in the foreground are fans, and the black object behind them is a 1048.

Main problem at the moment not the design, but how I'm going to run my watercooling exactly.

As I see it I have a few options:
1. Two fully separate circuits. One consists of a 1048, BA rad and Cascade WB, the other a 1048, LA and GPU, NB and any future blocks.

2. One circuit for all three blocks. Would probably need to upgrade to a Eheim 1250 and would prefer to change to a 3 fan, single pass radiator.

The fans depicted probably won't be in the final design, rather they will be connected to the radiator/s via shrouds, as the box isn't sealed and could be drawing air through places other than the radiator with the current fan positions.

Does anyone have any suggestions, comments or critisisms? I just can't decide the best way to set it up. Also would anyone possibly be interested in a box like this (Either just the box, or maybe a complete setup?) and what would you pay?

pippin88 · 08-01-2003, 11:29 PM

More pics:
http://www.users.bigpond.net.au/pipp...oxconcept1.jpg
http://www.users.bigpond.net.au/pipp...oxconcept2.jpg
http://www.users.bigpond.net.au/pipp...oxconcept3.jpg

copyman · 08-02-2003, 08:34 PM

I will give some things for you to think

a pump

one core of F2 Extreme 4fan

A blower

pippin88 · 08-02-2003, 10:52 PM

I've got to look into the blowers. Have you get any dimensions on the one you posted pics of?

copyman · 08-03-2003, 12:22 AM

Quote:

Originally posted by pippin88
I've got to look into the blowers. Have you get any dimensions on the one you posted pics of?

12'' x 7'' x 6'' is the total dimensions of this blower

[]'s

Ivo Guilhon
(Copyman)

pippin88 · 08-07-2003, 04:11 AM

Thanks for that.

pippin88 · 08-08-2003, 06:20 AM

I'm running into a few problem with fitting two 1048's, two 3 tap systems, and two radiators in

08-01-2003, 11:28 PM	#1
pippin88 Cooling Savant Join Date: Oct 2002 Location: Australia Posts: 285	Need some Input. I've been designing a box to sit under my Lian Li PC-60. I originally wanted to use brushed Alu, but that was going to be a problem and have since been offered some access to a Laser cutting machine capable of cutting through perspex. Here is my design so far: While it isn't that clear, the two black objects in the foreground are fans, and the black object behind them is a 1048. Main problem at the moment not the design, but how I'm going to run my watercooling exactly. As I see it I have a few options: 1. Two fully separate circuits. One consists of a 1048, BA rad and Cascade WB, the other a 1048, LA and GPU, NB and any future blocks. 2. One circuit for all three blocks. Would probably need to upgrade to a Eheim 1250 and would prefer to change to a 3 fan, single pass radiator. The fans depicted probably won't be in the final design, rather they will be connected to the radiator/s via shrouds, as the box isn't sealed and could be drawing air through places other than the radiator with the current fan positions. Does anyone have any suggestions, comments or critisisms? I just can't decide the best way to set it up. Also would anyone possibly be interested in a box like this (Either just the box, or maybe a complete setup?) and what would you pay?

08-01-2003, 11:29 PM	#2
pippin88 Cooling Savant Join Date: Oct 2002 Location: Australia Posts: 285	Re: Need some Input. More pics: http://www.users.bigpond.net.au/pipp...oxconcept1.jpg http://www.users.bigpond.net.au/pipp...oxconcept2.jpg http://www.users.bigpond.net.au/pipp...oxconcept3.jpg Last edited by pippin88; 08-01-2003 at 11:52 PM.

08-02-2003, 08:34 PM	#3
copyman Cooling Neophyte Join Date: Jul 2003 Location: Brazil Posts: 66	I will give some things for you to think a pump one core of F2 Extreme 4fan A blower

08-02-2003, 10:52 PM	#4
pippin88 Cooling Savant Join Date: Oct 2002 Location: Australia Posts: 285	I've got to look into the blowers. Have you get any dimensions on the one you posted pics of?

08-07-2003, 04:11 AM	#6
pippin88 Cooling Savant Join Date: Oct 2002 Location: Australia Posts: 285	Thanks for that.

08-08-2003, 06:20 AM	#7
pippin88 Cooling Savant Join Date: Oct 2002 Location: Australia Posts: 285	I'm running into a few problem with fitting two 1048's, two 3 tap systems, and two radiators in

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)