Whats the story on Maxi-Jet pumps?

mfpmax · 09-13-2002, 01:26 AM

I went down to a new pet store(they have a crappy website too!), and they have the Maxi-Jet water pump, like 3-5 models.

So instead of ordering and waiting(i'm impatient) for a Via 1300, I think I'm gonna look into getting one of these.

Anyone know of a good flow I should chose. Back in my day 120lph was good.

morphling1 · 09-13-2002, 08:30 AM

Yes I run two maxy-jets 1000 l/h models, connected in series to get dual head. They work great I run them inline they are small and quiet. Before that I had Eheim 1250 model, but those two connected in series gives me much better flow rate. So I recomend them.

mfpmax · 09-13-2002, 09:44 AM

Mind posting the picture of the pumps here?

mkosem · 09-13-2002, 12:53 PM

http://www2.arnes.si/~mlivak/chieftek/5.JPG

not sure where the second one is

--Matt

morphling1 · 09-13-2002, 01:18 PM

That's not my case, I made this for my friend, I also used Maxy-Jet 1200 l/h in that case.
Here's my dual pump setup:

sunblade · 09-13-2002, 03:05 PM

I originally had a maxi-jet 1200, but I downgraded to an mp900 because my system was pretty restrictive and it generated some heat at the pump. Still, both pumps ran/run perfectly fine.

morphling1 · 09-13-2002, 03:14 PM

Yes, pc watercooling is very resctrictive, that's why I use two pumps, works much better then one larger pump...

Puzzdre · 09-15-2002, 03:38 PM

I'm more than satisfied with my MJ 1000. Every recommendation!

http://forums.procooling.com/vbb/sho...?threadid=4104

09-13-2002, 01:26 AM	#1
mfpmax Cooling Savant Join Date: Oct 2000 Location: Rockledge,FL,US Posts: 731	Whats the story on Maxi-Jet pumps? I went down to a new pet store(they have a crappy website too!), and they have the Maxi-Jet water pump, like 3-5 models. So instead of ordering and waiting(i'm impatient) for a Via 1300, I think I'm gonna look into getting one of these. Anyone know of a good flow I should chose. Back in my day 120lph was good. __________________ My old and retired watercooling setup. Watercooled K6-2 450 at 600 Also Retired - Watercooling an XP1800@1782MHz

09-13-2002, 08:30 AM	#2
morphling1 Cooling Savant Join Date: Sep 2001 Location: Slovenia Posts: 468	Yes I run two maxy-jets 1000 l/h models, connected in series to get dual head. They work great I run them inline they are small and quiet. Before that I had Eheim 1250 model, but those two connected in series gives me much better flow rate. So I recomend them. __________________ [My ftp, with lots of pics, hope to be home page someday

09-13-2002, 09:44 AM	#3
mfpmax Cooling Savant Join Date: Oct 2000 Location: Rockledge,FL,US Posts: 731	Mind posting the picture of the pumps here? __________________ My old and retired watercooling setup. Watercooled K6-2 450 at 600 Also Retired - Watercooling an XP1800@1782MHz

09-13-2002, 12:53 PM	#4
mkosem Cooling Savant Join Date: May 2001 Location: here Posts: 494	http://www2.arnes.si/~mlivak/chieftek/5.JPG not sure where the second one is --Matt __________________ If you can't cool it, blow it up!! http://www.mattkosem.com

09-13-2002, 01:18 PM	#5
morphling1 Cooling Savant Join Date: Sep 2001 Location: Slovenia Posts: 468	That's not my case, I made this for my friend, I also used Maxy-Jet 1200 l/h in that case. Here's my dual pump setup: __________________ [My ftp, with lots of pics, hope to be home page someday

09-13-2002, 03:05 PM	#6
sunblade Registered User Join Date: Jul 2001 Location: USA Posts: 156	I originally had a maxi-jet 1200, but I downgraded to an mp900 because my system was pretty restrictive and it generated some heat at the pump. Still, both pumps ran/run perfectly fine.

09-13-2002, 03:14 PM	#7
morphling1 Cooling Savant Join Date: Sep 2001 Location: Slovenia Posts: 468	Yes, pc watercooling is very resctrictive, that's why I use two pumps, works much better then one larger pump... __________________ [My ftp, with lots of pics, hope to be home page someday

09-15-2002, 03:38 PM	#8
Puzzdre Cooling Savant Join Date: Aug 2002 Location: Croatia Posts: 969	I'm more than satisfied with my MJ 1000. Every recommendation! http://forums.procooling.com/vbb/sho...?threadid=4104 __________________ 'Out of cheese error... ...please reboot the universe (press the GBL to continue)'

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)