Whats the Autozone part number of a the basic 6*7 heatercore?

[redleader]

I'm looking at you BigBen

I thought it was 399009 at autozone, but thats a dollar more and has annoying top mounted barbs. I thought there was one that like the Dtek cores with outward facing barbs.

Thanks.

[bigben2k]

If you downloaded Airspirits database, you can look it up. Otherwise, I'd be happy to give you the corresponding heatercore4u model numbers.

Are you looking for max 6 by max 7, or are you looking for anything that's between 5.5 and 6.5 by 6.5 to 7.5?

[redleader]

Everyone recommends the Ford Econoline heater core that autozone sells for 28. I though there was a similar 6*7 inch model for $18, but I can't find it.

[bigben2k]

Ok, here goes!

Model# Height Width Thickness Inlet Outlet
2-610 6.25 5.5 1.3125 0.625 0.625
2-604 6.25 5.5 1.3125 0.625 0.625
2-729 5.875 6.75 2 0.625 0.625
2-723 5.875 6.75 2 0.625 0.625
2-719 5.875 6.75 2 0.625 0.625
2-702 5.5 6.25 2 0.75 0.625
2-598 6.875 5.625 2 0.625 0.625
2-596 6.25 5.25 2 0.625 0.625
2-595 5.5 6.125 2 0.625 0.5
2-591 5.5 6.25 2 0.625 0.5
2-567 6.25 5.25 2 0.5 0.5
2-551 5.25 6.625 2.625 0.625 0.625

(search param: 5 to 6 by 6 to 7)

None of those are for a Ford truck, except 2-729 (Ford Expedition), and 2-723 (Ford Windstar).

[bigdawginva]

Based on the barb locations on all those models I doubt those will work for him.

However, I think the 2-273, 2-447, 2-456 or 2-720 may be close.

[bigben2k]

Well, they don't come with a standard barb! What's the point of using a heatercore, if it doesn't involve a little handy work?

I like 2-551. It's 2 5/8 inch thick, and has the tubes coming out the sides (if that fits in the plan!).

[bigben2k]

Here's another set:

(search param: 5.5 to 6.5, by 6.5 to 7.5)

Model# Height Width Thickness Inlet Outlet
2-569 7.25 6.125 1.25 0.5 0.5
2-713 7.125 5.75 1.25 0.625 0.625
2-710 7.125 5.75 1.25 0.625 0.625
2-775 7.375 6.25 1.25 0.625 0.625
2-761 6.625 6.1875 1.625 0.625 0.625
2-328 7.125 6.125 2 0.75 0.625
2-470 7.125 6.125 2 0.75 0.625
2-321 7.125 6.125 2 0.75 0.75
2-252 7.125 5.625 2 0.75 0.625
2-435 7.125 6.125 2 0.75 0.625
2-639 6 7 2 0.625 0.625
2-568 7 5.625 2 0.5 0.5
2-719 5.875 6.75 2 0.625 0.625
2-723 5.875 6.75 2 0.625 0.625
2-729 5.875 6.75 2 0.625 0.625
2-598 6.875 5.625 2 0.625 0.625
2-262 7.125 6.125 2.5 0.75 0.625
2-439 7.125 6.125 2.5 0.75 0.625
2-440 7.125 6.125 2.5 0.75 0.625
2-558 7 6.125 2.5 0.625 0.625
2-547 6.375 6.75 2.625 0.625 0.625
2-554 6.375 6.75 2.625 0.625 0.625

2-710, 2-775, 2-761, 2-328, 2-470, 2-252, 2-262, 2-440 and 2-558 might be of particular interest, but you might have to cut the tubes on some of them.