 | ||
|
||
|
|||||||
| Snap Server / NAS / Storage Technical Goodies The Home for Snap Server Hacking, Storage and NAS info. And NAS / Snap Classifides |
 |
| Thread Tools |
10-13-2006, 08:52 AM
|
#1 |
|
Cooling Neophyte
Join Date: Oct 2006
Location: germany
Posts: 1
|
how to connect cpu fan in snap 4100
Hi,
I have got a snap 4100 with an defect fan, exactly the defect fan was removed. I bought a new fan and no I have no idea how to install the fan. There are two free PIN Connectors on the Motherboard. J11 is between CPU and RAM. J12 is between RAM and Network Port. J14 is for the 2 case fans. I think, one is for the fan and the other one for the thermal resitor. Does anybody know the electrical values of this resistor (NTC?). I need a new one too :-(( Thanks for your advice. |
|
|
|
10-13-2006, 09:04 AM
|
#2 |
|
Cooling Savant
Join Date: Aug 2004
Location: UK
Posts: 909
|
Re: how to connect cpu fan in snap 4100
I dont know about the 4100, but my 2200 plugs straight into the power cables (molex thingys to the hard drives)
__________________
Snap Server Help Wiki - http://wiki.procooling.com/index.php/Snap_Server Snap Server 2200 v3.4.807 2x 250GB Seagate Barracuda 7200.9 w/ UNIDFC601512M Replacement Fan "Did you really think it would be that easy??" Other NAS's 1x NSLU2 w/ 512mb Corsair Flash Voyager Running Unslung 6.8b 1x NSLU2 w/ 8Gb LaCie Carte Orange Running Debian/NSLU2 Stable 4.0r0 250GB LaCie Ethernet Disk Running Windows XP Embedded |
|
|
|
|
10-13-2006, 01:15 PM
|
#3 |
|
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: how to connect cpu fan in snap 4100
Either Phoenix or Jontz should be able to answer that.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
|
|
|
|
10-13-2006, 02:34 PM
|
#4 |
|
Thermophile
Join Date: May 2006
Location: Yakima, WA
Posts: 1,282
|
Re: how to connect cpu fan in snap 4100
Not me this time. I have not seen the insides of a 4100, so I do not know. The 4000 uses the Molex connectors like Sam's.
|
|
|
|
|
10-13-2006, 02:42 PM
|
#5 |
|
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: how to connect cpu fan in snap 4100
Do you know how the cpu fan jack is labeled on the 4000?
The photo shows it by the ram slot near the cpu. It could be the same for 4100
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
|
|
|
|
10-13-2006, 02:50 PM
|
#6 |
|
Cooling Savant
Join Date: Oct 2001
Location: Dallas, Tx
Posts: 469
|
Re: how to connect cpu fan in snap 4100
why not just get a fan that uses molex connectors?
__________________
Snap Servers: 1100 - 1x300gb Seagate Baracuda (SnapOS Version 3.4.807) 2200 - 2x80gb Maxtor (one dead) (SnapOS 4.0.860) |
|
|
|
|
10-13-2006, 06:11 PM
|
#7 | |
|
Thermophile
Join Date: May 2006
Location: Yakima, WA
Posts: 1,282
|
Re: how to connect cpu fan in snap 4100
Quote:
|
|
|
|
|
|
10-14-2006, 11:59 AM
|
#8 | |
|
Cooling Savant
Join Date: Apr 2006
Location: Tennessee
Posts: 157
|
Re: how to connect cpu fan in snap 4100
Quote:
|
|
|
|
|
|
10-14-2006, 02:09 PM
|
#9 |
|
Cooling Savant
Join Date: Aug 2004
Location: UK
Posts: 909
|
Re: how to connect cpu fan in snap 4100
Nice one rpmurray
Jobs a good 'un
__________________
Snap Server Help Wiki - http://wiki.procooling.com/index.php/Snap_Server Snap Server 2200 v3.4.807 2x 250GB Seagate Barracuda 7200.9 w/ UNIDFC601512M Replacement Fan "Did you really think it would be that easy??" Other NAS's 1x NSLU2 w/ 512mb Corsair Flash Voyager Running Unslung 6.8b 1x NSLU2 w/ 8Gb LaCie Carte Orange Running Debian/NSLU2 Stable 4.0r0 250GB LaCie Ethernet Disk Running Windows XP Embedded |
|
|
|
|
10-14-2006, 03:19 PM
|
#10 | |
|
Cooling Savant
Join Date: Oct 2001
Location: Dallas, Tx
Posts: 469
|
Re: how to connect cpu fan in snap 4100
Quote:
 lol Shane
__________________
Snap Servers: 1100 - 1x300gb Seagate Baracuda (SnapOS Version 3.4.807) 2200 - 2x80gb Maxtor (one dead) (SnapOS 4.0.860) |
|
|
|
|
|
10-15-2006, 04:40 AM
|
#11 | |
|
Cooling Savant
Join Date: Aug 2004
Location: UK
Posts: 909
|
Re: how to connect cpu fan in snap 4100
Quote:
Old people say that too :P
__________________
Snap Server Help Wiki - http://wiki.procooling.com/index.php/Snap_Server Snap Server 2200 v3.4.807 2x 250GB Seagate Barracuda 7200.9 w/ UNIDFC601512M Replacement Fan "Did you really think it would be that easy??" Other NAS's 1x NSLU2 w/ 512mb Corsair Flash Voyager Running Unslung 6.8b 1x NSLU2 w/ 8Gb LaCie Carte Orange Running Debian/NSLU2 Stable 4.0r0 250GB LaCie Ethernet Disk Running Windows XP Embedded |
|
|
|
|
|
10-15-2006, 08:20 PM
|
#12 |
|
Cooling Savant
Join Date: Feb 2006
Location: South Bend, IN
Posts: 385
|
Re: how to connect cpu fan in snap 4100
Sorry that I couldn't jump in on this one guys! I had ANOTHER death in the family, have been away for a few days. Guess you'll have to revoke my forum privilages for a while for slacking off
__________________
Snap Server 4100, 4x120GB Seagate Drives, RAID 5, version 3.4.803 |
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
All times are GMT -5. The time now is 05:20 AM.